IP Based PA System
Com1 IP Pbx offers a powerful PA System using SIP Paging Gateway. The advantage with Com1 PA System is, it eliminates the need for a separate cabling and it can be part of your network cabling.
| Description | Normal PA System | Com1 IP Based PA System |
| Cabling | A separate cabling network needs to be created. | As this is IP Based, as per the above schematic this will be part of your structured cabling and no additional cabling |
| Amplifiers | Many amplifiers needs to be deployed based on the area covered | SIP Paging gateway gives 10W, 20W & 30W output options in the same gateway that can be selected based on your application. |
| Speaker Station | You can access PA system only from speaker station. Creating more than one speaker station is very complicated and expensive. | You can access PA system from any extension that are authorised to make announcement from their intercom extension, no need to create a special speaker station. |
| Zone Creation | Very Complicated done using Hardware and not many can be created | 100 Zones can be created in our software |
| Calling Individual Speaker | Not Possible | You can call any individual speaker or a group of speaker or a complete set of speakers using our PA system. |
| Scheduled Pre Recorded Announcement | Not Possible | 250 Scheduled Pre Recorded Announcement Can be played |
| Background Music | Can be activated only from pen drive or media and follows the sequence and needs regular monitering | Unlimited loop on random selection and needs no maintenance |
| Interlinking All Branch PA Systems | Not Possible | With Static IP you can create a single PA system across all your outlets / branches |