FXS converts Ip Extensions to Analog Extensions. Input to FXS is network cable that is connected to the same network that connects Com1 Ip Pbx while Output from FXS is 2 core wire for each extension that can be connected to analog extensions. FXS comes with a configuration as low as 4 Ports to as high as 112 Ports with most cost effective and popular being 32 ports. Since FXS itself has an inbuilt intercom among the registered extension, a proper planning of FXS configuration can act as standby for intercom in the event of failure to connect with Com1 Ip Pbx as well as reduce the load on Ip Pbx. We strongly recommend Dinstar though every standard FXS can be connected to Com1 Ip Pbx. To easily configure the extensions in Dinstar FXS we have an XML output in our GUI.
FXO converts Analog Trunk to SIP Trunk. Input to FXO is 2 core wire for each trunk while output is network cable that is connected to the same network that connects Com1 Ip Pbx. FXO comes with a configuration as low as 4 Ports to as high as 16 Ports with most cost effective and popular being 8 ports. We strongly recommend Dinstar though every standard FXO can be connected to Com1 Ip Pbx. As many Analog trunk lines are connected to FXO and converted as a SIP account, it is technically unfeasible to show individual trunk status in any IP Phone unlike PCM/TDM Epabx. There is no limitation of number of Trunks / FXO that can be connected ti the Com1 Ip Pbx, virtually unlimited.
GSM / Volte Gateway converts GSM/Volte Sim Cards to SIP Trunk. GSM Gateway has provision to insert SIM cards into SIM slots while output is network cable that is connected to the same network that connects Com1 Ip Pbx. GSM Gateway comes with a configuration as low as 4 Ports to as high as 64 Ports with most cost effective and popular being 32 ports. We strongly recommend Dinstar though every standard GSM Gateway can be connected to Com1 Ip Pbx. Note : You cannot put a Volte sim in GSM gateway meant for 2G/3G/4G Sim cards while 2G/3G/4G Sim cards will work in a Volte gateway. Dinstar Offers API to send SMS via SIM cards that is connected to the network
PRI Gateway converts PRI Trunk to SIP Trunk. PRI Gateway has provision to insert PRI Line while output is network cable that is connected to the same network that connects Com1 Ip Pbx. PRI Gateway comes with a configuration as low as 1 Port to as high as 14 Ports with most widely sold being 1 Port. We strongly recommend Dinstar though every standard PRI Gateway can be connected to Com1 Ip Pbx.
Virtually there is no restriction imposed by software on the amount of Trunk that can be connected to Com1 Ip Pbx server. As of now we have provided 50 different trunks can be registered to Com1 Ip Pbx server and none of our customers have crossed 5 at best in our experience. However the hardware chosen needs to have enough resources to handle proposed traffic.
As of now the only model we have can handle 600 extensions while we building our enterprise model with 6000 extensions.
We can connect unlimited number of PC console as needed by customer. More details about PC console can be availed @ - PC Console Details
Copyright 2024 COM1. Designed By ABOSS Technologies